Dow Corning 210H Fluid
Head stabilized polydimethylsiloxane
DOW CORNING 210H Fluid ( Heat Stabilized Silicone Fluid )Features:
Dimethyl silicone fluid with improved oxidation stability
Minimal viscosity change when subjected to severe heal and shear stresses
Applications:Mechano-fluid devices and controls.Heat transfer fluid in oil baths.Typical Properties:Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Flash point - open cup
Pour point (ASTM D-97)1
Specific gravity at 25oC /15.6oC
Viscosity at 25oC
Viscosity-temperature coefficient, 1- (viscosity at 99oC / viscosity at 38oC)
Coefficient of expansion peroC unit volume/unit volume
Vapour pressure at 204oC
Thermal conductivity at 25oC, W/m.K²
Volatility, % weight loss³
Specific heat at 98.8oC
Apparently due to super-cooling, this test method yields pour points lower than the temperatures at which this silicons fluid would freeze if held at such temperature for a longer period.
Temperature gradient of loC per cm thickness.
35-40 grammes of fluid in a beaker having approximately a 20 cm² bottom area, heated in an air-circulating oven for 48 hours at 204oC.
Product Code : 04
* Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.